Ford wide five wheel adapter

[34fordy]

Originally Posted by Tim Ayers

Dorman catalog gives all the specs if you take the time to look through it

That is correct Tim, however in my little experience I have found it not exactly easy peasy. Some shanks have splines and some do not. If you are putting them into aluminum it is much more forgiving than steel. I have also found that a small bench press is not sufficient to set a stud, even in aluminum. A HEALTHY hammer on a solid base to work on has been necessary for me. Very possibly I have erred when I have done this. It is not always easy to find good information (for me) the first time I attempt something. Trial and error seems to be my forte. LOL