1935 with 1946 spindles which drag link?

[flatheadfan]

Kevin-

I am not sure what you are trying to do with the '41 drag link. The only reason you would need a '41 drag link is if you are using a '41 spindle. All '35-'48 spindles require a bottom mounted tie rod ends (except the '41). Both the 11A and 78 arms are 1.25" longer than the 48. If you use an 11a or 78 you will find a hard turn to the right will cause the pitman arm to hit the left wishbone. A hard turn to the left and the drag link will hit the oil pan. Stay with the 48.

Hope this helps.

Tom