|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
 |
|
Thread Tools | Display Modes |
02-24-2026, 07:08 PM
|
#1 |
|
Senior Member
Join Date: Mar 2014
Location: Jacksonville FL
Posts: 5,164
|
Model B intake diameter
Can one of the “Model B” guys verify the intake diameter for the carburetor is it 1-1/8 Model A and 1-1/4” 32-Model B?
Thanks Last edited by rockfla; 02-24-2026 at 07:34 PM. |
|
|
|
02-24-2026, 07:45 PM
|
#2 |
|
Senior Member
Join Date: Mar 2014
Location: Jacksonville FL
Posts: 5,164
|
Re: Model B intake diameter
After an hour of looking in my shop, found my B Intake and found the answer. Call of the dogs!!!
|
|
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
02-24-2026, 10:10 PM
|
#3 |
|
Senior Member
Join Date: May 2015
Posts: 11,643
|
Re: Model B intake diameter
So, what's the answer?...
|
|
|
|
|
02-24-2026, 11:55 PM
|
#4 |
|
Senior Member
Join Date: Jan 2011
Location: Beverly Kansas
Posts: 5,557
|
Re: Model B intake diameter
And, note that the B mounting flange has a bit of an offset twist to it. It makes it so the choke rod and main jet adjustment is not dead straight. It works...but not smooth operating like the original A
|
|
|
|
|
02-25-2026, 07:38 AM
|
#5 | |
|
Senior Member
Join Date: Mar 2014
Location: Jacksonville FL
Posts: 5,164
|
Re: Model B intake diameter
Sponsored Links (Register now to hide all advertisements)
Quote:
1932 Model B is 1-1/4" |
|
|
|
|
|
«
Previous Thread
|
Next Thread
»
Linear Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 02:53 AM.