Model B intake diameter
 

Can one of the “Model B” guys verify the intake diameter for the carburetor is it 1-1/8 Model A and 1-1/4” 32-Model B?

Thanks

Re: Model B intake diameter
 

After an hour of looking in my shop, found my B Intake and found the answer. Call of the dogs!!!

Re: Model B intake diameter
 

So, what's the answer?...

Re: Model B intake diameter
 

And, note that the B mounting flange has a bit of an offset twist to it. It makes it so the choke rod and main jet adjustment is not dead straight. It works...but not smooth operating like the original A

Re: Model B intake diameter
 

Pete
1932 Model B is 1-1/4"