The Ford Barn

OLD AS I · 03-12-2017, 07:19 PM

Getting ready to install my exhaust system, '46 V8 dual system. Wanting to avoid using U clamps to allow removal, anything available to make a good seal that will allow removal take apart later

JSeery · 03-12-2017, 07:33 PM

Quote:

Originally Posted by oldasi

Getting ready to install my exhaust system, '46 V8 dual system. Wanting to avoid using U clamps to allow removal, anything available to make a good seal that will allow removal take apart later

If your looking for something modern there are some cool sleeve clamp type of couples that I like. Stainless steel and around $8 each. Places like Jegs have them.

Joe Immler · 03-12-2017, 07:37 PM

X2 on JSeery's info. They work very well.

glennpm · 03-13-2017, 06:53 AM

Sponsored Links (Register now to hide all advertisements)

Also apply anti seize liberally with an acid brush on the male end. This makes it much easier to slide off later.

03-12-2017, 07:19 PM	#1
OLD AS I Senior Member Join Date: Oct 2014 Location: Oakwood, ON Canada Posts: 251	Take apart exhaust system Getting ready to install my exhaust system, '46 V8 dual system. Wanting to avoid using U clamps to allow removal, anything available to make a good seal that will allow removal take apart later

03-12-2017, 07:37 PM	#3
Joe Immler Senior Member Join Date: Dec 2012 Location: Massillon, Ohio Posts: 786	Re: Take apart exhaust system X2 on JSeery's info. They work very well.

03-13-2017, 06:53 AM	#4
glennpm Senior Member Join Date: Sep 2014 Location: Mid-Coast Maine Posts: 3,346	Re: Take apart exhaust system Sponsored Links (Register now to hide all advertisements) Also apply anti seize liberally with an acid brush on the male end. This makes it much easier to slide off later.