The Ford Barn - Take apart exhaust system

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)

- - Take apart exhaust system (https://www.fordbarn.com/forum/showthread.php?t=216606)

OLD AS I

03-12-2017 07:19 PM

Take apart exhaust system

Getting ready to install my exhaust system, '46 V8 dual system. Wanting to avoid using U clamps to allow removal, anything available to make a good seal that will allow removal take apart later

JSeery

03-12-2017 07:33 PM

Re: Take apart exhaust system

1 Attachment(s)

Quote:

Originally Posted by oldasi (Post 1441863)

Getting ready to install my exhaust system, '46 V8 dual system. Wanting to avoid using U clamps to allow removal, anything available to make a good seal that will allow removal take apart later

If your looking for something modern there are some cool sleeve clamp type of couples that I like. Stainless steel and around $8 each. Places like Jegs have them.

Joe Immler

03-12-2017 07:37 PM

Re: Take apart exhaust system

X2 on JSeery's info. They work very well.

glennpm

03-13-2017 06:53 AM

Re: Take apart exhaust system

Also apply anti seize liberally with an acid brush on the male end. This makes it much easier to slide off later.

All times are GMT -5. The time now is 03:15 PM.