The Ford Barn

KiWinUS · 08-02-2014, 07:24 AM

Anyone have a L100 cam for a flathead from Cam Techniques -Dave Degeneres , preferably new they would either sell or lend me ? Either early 59AB or late 8BA is fine . Since Dave retired & we can not buy these any longer , I want to make a master & grind these cams making them available to all that want them again.
PM me please if you can help me .
Thanks
Cheers
Tony

40cpe · 08-02-2014, 09:08 AM

Thank you for stepping up. Best of luck in your venture.

4tford · 08-02-2014, 09:24 AM

Depending on the price I would probably take 6 or so..

KiWinUS · 08-02-2014, 11:32 AM

All I need is I cam & I can make it happen !!!

oldford2 · 08-02-2014, 12:23 PM

Which cam do you want to copy, 59AB or 8BA? Or, when you get the copy can you do both? Dumb question? John

KiWinUS · 08-02-2014, 12:27 PM

Sponsored Links (Register now to hide all advertisements)

Either will work . I can copy either & then be able to grind either. I just need a cam to copy !!!

Ken/Alabama · 08-02-2014, 03:03 PM

I wish someone would step up to the plate with one. I'd sure like to have one of those myself.

KiWinUS · 08-02-2014, 03:40 PM

Ken I could even grind it on a LZ V12 , once I get a master !!!
How "BAD" would that be !!

Pete · 08-02-2014, 04:17 PM

Good luck in your quest.
People seem to be reluctant to have this process done to their favorite cam even if it involves getting their used cam reground to the original specs free in the process.

I have been looking for a 6355 Harmon Collins cam for 20 years to copy.

Masters made off a used cam, depending on wear amount, are not as good as an original unused one but I doubt anyone could tell on the dyno.

super flat · 08-02-2014, 04:42 PM

I would be in for a couple if you do it, Gary

JM 35 Sedan · 08-02-2014, 05:53 PM

I wonder what happened to the equipment, tooling, masters, etc., that Dave Generous had?

40cpe · 08-02-2014, 06:37 PM

Someone must have talked to him. This is the last email address I had
[email protected]

Blownflatheaddeuce · 08-03-2014, 09:07 AM

PM sent !

BFD

KiWinUS · 08-03-2014, 01:38 PM

WOW lotsa lookers & lotsa interest !
Thanks for all the input & support guys !!
May have a slightly used cam but nothing definite yet!
Would sure appreciate all & any help !!!
Thanks
Cheers
Tony

TStiles · 08-03-2014, 01:43 PM

Put me down for a purchase if you are successful in finding what you need!

Ol' Ron · 08-03-2014, 07:42 PM

I know David had the Masters for sale, but I can't get a hold of him.

sidevalve8ba · 08-04-2014, 10:18 AM

Keep us posted if you have any luck with this. Looks like there is a ready-made market for such a camshaft.

Fordestes · 08-04-2014, 11:00 AM

I have an L -100 never used, and an L-100b. also never ran, I may consider a loan if there is an insurance or bond as a surety against loss or damage in shipping and replacement if it dosn't make it back to me for any reason and in the same condition, as well as a couple of regrinds on my cores.
Fordestes,
[email protected]

KiWinUS · 08-04-2014, 11:07 AM

Quote:

Originally Posted by Fordestes

I have an L -100 never used, and an L-100b. also never ran, I may consider a loan if there is an insurance or bond as a surety against loss or damage in shipping and replacement if it dosn't make it back to me for any reason and in the same condition, as well as a couple of regrinds on my cores.
Fordestes,
[email protected]

A big YES to all the above !!!
Thank you so much!!
I will email you tonight when I get home . I will also give you my phone numbers .
Thanks again !!
Cheers
Tony

Fordestes · 08-04-2014, 11:16 AM

Pete,
send me the info about the harmon and collins, I have a harmon and collins I had ground back in the 70"s when I was a teenager and knew it all, I dont remember what it is ,I will have to check it out, I only ran it a few pases before I blew the rest of the engine, the cam has been hanging in the shop ever since,I just had my hands in it this morning and thought to myself,how about building another engine around it.
I am a hell of a lot older now and know when to back out of the throttle.
fordestes,
[email protected]

08-02-2014, 07:24 AM	#1
KiWinUS Senior Member Join Date: May 2010 Location: Charlotte NC KiWi-L100 available here Posts: 3,416	L100 Cam Anyone have a L100 cam for a flathead from Cam Techniques -Dave Degeneres , preferably new they would either sell or lend me ? Either early 59AB or late 8BA is fine . Since Dave retired & we can not buy these any longer , I want to make a master & grind these cams making them available to all that want them again. PM me please if you can help me . Thanks Cheers Tony

08-02-2014, 09:08 AM	#2
40cpe Senior Member Join Date: May 2010 Location: Star, MS Posts: 4,161	Re: L100 Cam Thank you for stepping up. Best of luck in your venture.

08-02-2014, 09:24 AM	#3
4tford Senior Member Join Date: May 2010 Location: Regina Canada Posts: 1,337	Re: L100 Cam Depending on the price I would probably take 6 or so..

08-02-2014, 11:32 AM	#4
KiWinUS Senior Member Join Date: May 2010 Location: Charlotte NC KiWi-L100 available here Posts: 3,416	Re: L100 Cam All I need is I cam & I can make it happen !!!

08-02-2014, 12:23 PM	#5
oldford2 Senior Member Join Date: May 2010 Location: pittsfield, MA Posts: 2,087	Re: L100 Cam Which cam do you want to copy, 59AB or 8BA? Or, when you get the copy can you do both? Dumb question? John

08-02-2014, 12:27 PM	#6
KiWinUS Senior Member Join Date: May 2010 Location: Charlotte NC KiWi-L100 available here Posts: 3,416	Re: L100 Cam Sponsored Links (Register now to hide all advertisements) Either will work . I can copy either & then be able to grind either. I just need a cam to copy !!!

08-02-2014, 03:03 PM	#7
Ken/Alabama Senior Member Join Date: May 2010 Location: Alabama Posts: 3,455	Re: L100 Cam I wish someone would step up to the plate with one. I'd sure like to have one of those myself.

08-02-2014, 03:40 PM	#8
KiWinUS Senior Member Join Date: May 2010 Location: Charlotte NC KiWi-L100 available here Posts: 3,416	Re: L100 Cam Ken I could even grind it on a LZ V12 , once I get a master !!! How "BAD" would that be !!

08-02-2014, 04:17 PM	#9
Pete BANNED Join Date: May 2010 Location: Wa. Posts: 5,423	Re: L100 Cam Good luck in your quest. People seem to be reluctant to have this process done to their favorite cam even if it involves getting their used cam reground to the original specs free in the process. I have been looking for a 6355 Harmon Collins cam for 20 years to copy. Masters made off a used cam, depending on wear amount, are not as good as an original unused one but I doubt anyone could tell on the dyno.

08-02-2014, 04:42 PM	#10
super flat Senior Member Join Date: Jan 2011 Location: west bend wi Posts: 319	Re: L100 Cam I would be in for a couple if you do it, Gary __________________ I am usually relatively happy------Gary

08-02-2014, 05:53 PM	#11
JM 35 Sedan Senior Member Join Date: May 2010 Location: Near Rising Sun, Maryland Posts: 10,876	Re: L100 Cam I wonder what happened to the equipment, tooling, masters, etc., that Dave Generous had? __________________ *John* *"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein*

08-02-2014, 06:37 PM	#12
40cpe Senior Member Join Date: May 2010 Location: Star, MS Posts: 4,161	Re: L100 Cam Someone must have talked to him. This is the last email address I had [email protected]

08-03-2014, 09:07 AM	#13
Blownflatheaddeuce Senior Member Join Date: May 2010 Location: Deep DEEP South Posts: 233	Re: L100 Cam PM sent ! BFD

08-03-2014, 01:38 PM	#14
KiWinUS Senior Member Join Date: May 2010 Location: Charlotte NC KiWi-L100 available here Posts: 3,416	Re: L100 Cam WOW lotsa lookers & lotsa interest ! Thanks for all the input & support guys !! May have a slightly used cam but nothing definite yet! Would sure appreciate all & any help !!! Thanks Cheers Tony

08-03-2014, 01:43 PM	#15
TStiles Senior Member Join Date: Sep 2012 Location: Kitsap Peninsula, Western WA Posts: 276	Re: L100 Cam Put me down for a purchase if you are successful in finding what you need!

08-03-2014, 07:42 PM	#16
Ol' Ron Senior Member Join Date: May 2010 Location: Chester Vt Posts: 8,985	Re: L100 Cam I know David had the Masters for sale, but I can't get a hold of him.

08-04-2014, 10:18 AM	#17
sidevalve8ba Senior Member Join Date: May 2013 Location: Harrisonburg, VA Posts: 950	Re: L100 Cam Keep us posted if you have any luck with this. Looks like there is a ready-made market for such a camshaft.

08-04-2014, 11:00 AM	#18
Fordestes Senior Member Join Date: May 2010 Posts: 932	Re: L100 Cam I have an L -100 never used, and an L-100b. also never ran, I may consider a loan if there is an insurance or bond as a surety against loss or damage in shipping and replacement if it dosn't make it back to me for any reason and in the same condition, as well as a couple of regrinds on my cores. Fordestes, [email protected] Last edited by Fordestes; 08-04-2014 at 11:03 AM. Reason: add info.

08-04-2014, 11:16 AM	#20
Fordestes Senior Member Join Date: May 2010 Posts: 932	Re: L100 Cam Pete, send me the info about the harmon and collins, I have a harmon and collins I had ground back in the 70"s when I was a teenager and knew it all, I dont remember what it is ,I will have to check it out, I only ran it a few pases before I blew the rest of the engine, the cam has been hanging in the shop ever since,I just had my hands in it this morning and thought to myself,how about building another engine around it. I am a hell of a lot older now and know when to back out of the throttle. fordestes, [email protected]