59ab 80 over cam bearing

[Brian]

With that block, you could make a billet cam with journals that ran directly in the block that incorporated incredible lift and duration. The stock journal size limits the amount of lift possible....Just dreaming.....

[Tim Ayers]

Originally Posted by Brian

With that block, you could make a billet cam with journals that ran directly in the block that incorporated incredible lift and duration. The stock journal size limits the amount of lift possible....Just dreaming.....

Funny you say that, someone on Ebay is selling a master lobe for an Isky 505 cam. I believe Dale H. (Bored & Stroked) has one that Isky ground for him. Would need this type of block for that cam I'd assume.

[KiWinUS]

Originally Posted by Tim Ayers

Funny you say that, someone on Ebay is selling a master lobe for an Isky 505 cam. I believe Dale H. (Bored & Stroked) has one that Isky ground for him. Would need this type of block for that cam I'd assume.

Interesting. So it is not a 505 master that is for sale but a single lobe from a cam that has been ground to the 505 spec. As seller states cam is not a flathead.