The Ford Barn

David W Juliano · 01-07-2011, 01:06 PM

Rebuilding a 1939 Trico wiper motor, part# SK-46. Actually a very simple rebuild- disassemble, clean throughly, check housing for warping, lubricate, and reassemble. The problem is the housing gasket. The gasket offered by Mac's and others are for "small" motors and don't fit the SK-46 and I assume other wiper motors for Ford cars 37-48. Short of making the gasket, anyone know of a source for the correct housing gasket. Also, any suggestions on a lubricant to use on the paddle.

19Fordy · 01-07-2011, 01:34 PM

Sponsored Links (Register now to hide all advertisements)

This gentleman probably has it. http://www.wiperman.com/

01-07-2011, 01:06 PM	#1
David W Juliano Member Join Date: May 2010 Posts: 30	Windshield wiper rebuild Rebuilding a 1939 Trico wiper motor, part# SK-46. Actually a very simple rebuild- disassemble, clean throughly, check housing for warping, lubricate, and reassemble. The problem is the housing gasket. The gasket offered by Mac's and others are for "small" motors and don't fit the SK-46 and I assume other wiper motors for Ford cars 37-48. Short of making the gasket, anyone know of a source for the correct housing gasket. Also, any suggestions on a lubricant to use on the paddle.

01-07-2011, 01:34 PM	#2
19Fordy Senior Member Join Date: May 2010 Location: Coral Springs FL Posts: 11,916	Re: Windshield wiper rebuild Sponsored Links (Register now to hide all advertisements) This gentleman probably has it. http://www.wiperman.com/