| David W Juliano |
01-07-2011 01:06 PM |
Windshield wiper rebuild
Rebuilding a 1939 Trico wiper motor, part# SK-46. Actually a very simple rebuild- disassemble, clean throughly, check housing for warping, lubricate, and reassemble. The problem is the housing gasket. The gasket offered by Mac's and others are for "small" motors and don't fit the SK-46 and I assume other wiper motors for Ford cars 37-48. Short of making the gasket, anyone know of a source for the correct housing gasket. Also, any suggestions on a lubricant to use on the paddle.
|
