|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
![]() |
|
Thread Tools | Display Modes |
|
|
#1 |
|
Junior Member
Join Date: May 2010
Posts: 12
|
My '53 Ford stopped running on the road recently. The motor died as if it had run out of gas. The pump is getting gas through the hose and there is spark. This leads me to believe that there is a carburetor problem.
The carb I have has worked well for the 7 or 8 years it's been on the motor with no signs of trouble. I don't know much about carburetors, and I'm not confident enough to rebuild it myself. Would someone please make a recommendation for a rebuild service for an EAB V8 carburetor. Is ken ct still doing this? I am in southeastern Massachusetts and would prefer not to send the unit across the country if I don't have to. Thank you. Rick |
|
|
|
|
|
#2 |
|
Senior Member
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 12,132
|
I would think the "NY" in "Charlie NY" should tell you something. That, along with the myriad of posts on this site attesting to the quality of his work.
|
|
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
|
#3 |
|
Senior Member
Join Date: May 2010
Location: H.B. So. Calif
Posts: 411
|
Have you looked down the carb while pushing on the throttle to see if there is a squirt of gas?
|
|
|
|
|
|
#4 |
|
Junior Member
Join Date: May 2010
Posts: 12
|
Thank you, tubman. I found his contact information in another thread.
|
|
|
|
|
|
#5 |
|
Junior Member
Join Date: May 2010
Posts: 12
|
Thank you, also, Bill. So easy to overlook the obvious!
|
|
|
|
|
|
#6 |
|
Junior Member
Join Date: May 2016
Location: Nebraska
Posts: 10
|
Sponsored Links (Register now to hide all advertisements)
|
|
|
|
![]() |
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|