The Ford Barn

majohnson00 · 04-15-2016, 05:34 PM

How, and where, do the two cups that come with the seat hardware kit from Snyder's attach to the Seat? The previous owner had carriage bolts threaded to the bottom corners of the seat, up into the wood. I removed these and installed the cups with wood screws,(which do not come with the kit), into the wood of the seat bottom. Now the seat tilts way to far back. What am I missing? I used the 2" offset legs from Snyder's also, but that should have nothing to do with it. Any Idea's? Thanks, Marv

04-15-2016, 05:34 PM	#1
majohnson00 Senior Member Join Date: May 2010 Location: Fenton, Mich. Posts: 147	Model A Front Seats: How, and where, do the two cups that come with the seat hardware kit from Snyder's attach to the Seat? The previous owner had carriage bolts threaded to the bottom corners of the seat, up into the wood. I removed these and installed the cups with wood screws,(which do not come with the kit), into the wood of the seat bottom. Now the seat tilts way to far back. What am I missing? I used the 2" offset legs from Snyder's also, but that should have nothing to do with it. Any Idea's? Thanks, Marv