The Ford Barn

BUBBAS IGNITION · 02-13-2016, 03:58 PM

Had a Model A sat rebuilding a Mallory distributor for the Model A....More info and pictures of the build at

http://www.bubbasignition.com/pictures.html

Site has pictures and a Model A page as well under bangers...

Mafman · 02-14-2016, 05:46 AM

Thanks for sharing Bubba. Nice work!

hardtimes · 02-14-2016, 01:15 PM

Quote:

Originally Posted by BUBBAS IGNITION

Had a Model A sat rebuilding a Mallory distributor for the Model A....More info and pictures of the build at

http://www.bubbasignition.com/pictures.html

Site has pictures and a Model A page as well under bangers...

Hey Jim,
Thanks for sharing, yet again

!
I've got one (four cyl Mallory marine engine) that I must eventually send to you for same.

Mikeinnj · 02-14-2016, 01:35 PM

Your email is not working

Rowdy · 02-14-2016, 01:45 PM

I have 5 or 6 of the YA 11A's. In a couple of years I will probably send you two of them for rebuilding. Will set the rest back for future use. Hope to have the same results. Rod

700rpm · 02-14-2016, 03:26 PM

Sponsored Links (Register now to hide all advertisements)

Those Mallorys might be great but they're way too complicated for this old guy to work on. Glad a place like Bubba's exists to help.

colin1928 · 02-14-2016, 03:28 PM

AS always great work Jim

KMeredith87 · 02-14-2016, 03:47 PM

Have an original Mallory but too many pieces need replaced or are missing....got one of bubba's and love it. Only change I made was making my own wires for it. Best distributor I've ever used!

hardtimes · 02-15-2016, 01:43 AM

Quote:

Originally Posted by KMeredith87

Have an original Mallory but too many pieces need replaced or are missing....got one of bubba's and love it. Only change I made was making my own wires for it. Best distributor I've ever used!

Yup, got one of those also ! He does nice work, indeed

Nice wire color selection.

Flathead · 02-15-2016, 11:30 AM

Is one with a cast iron body unusual?

Rowdy · 02-15-2016, 01:13 PM

I have more cast iron bodied Mallory's than aluminum. I think they are more plentiful. Used on Gleaner Combines and other industrial applications. Mostly the same components inside and most seem to be single point instead of dual point. Rod

Flathead · 02-15-2016, 05:27 PM

Thanks, I have one of each and always wondered about it.

BUBBAS IGNITION · 02-15-2016, 10:03 PM

Quote:

Originally Posted by Mikeinnj

Your email is not working

use a pm here on the barn or [email protected] i am working on the site email..

02-13-2016, 03:58 PM	#1
BUBBAS IGNITION Senior Member Join Date: May 2010 Location: SPEEDWAY INDIANA Posts: 4,148	Model A Mallory Ignition at Bubbas Had a Model A sat rebuilding a Mallory distributor for the Model A....More info and pictures of the build at http://www.bubbasignition.com/pictures.html Site has pictures and a Model A page as well under bangers... __________________ If it Makes Spark, we do it !!!! www.bubbasignition.com [email protected]

02-14-2016, 05:46 AM	#2
Mafman Senior Member Join Date: Aug 2010 Location: Charlotte, NC Posts: 147	Re: Model A Mallory Ignition at Bubbas Thanks for sharing Bubba. Nice work! __________________ Mafman James Johnson

02-14-2016, 01:35 PM	#4
Mikeinnj Senior Member Join Date: May 2010 Location: Northern New Jersey Posts: 1,262	Re: Model A Mallory Ignition at Bubbas Your email is not working

02-14-2016, 01:45 PM	#5
Rowdy BANNED Join Date: May 2010 Location: Gothenburg Nebraska Just off I-80 Posts: 4,893	Re: Model A Mallory Ignition at Bubbas I have 5 or 6 of the YA 11A's. In a couple of years I will probably send you two of them for rebuilding. Will set the rest back for future use. Hope to have the same results. Rod __________________ Do the RIGHT thing - Support the H.A.M.B. Alliance!!!!

02-14-2016, 03:26 PM	#6
700rpm Senior Member Join Date: May 2010 Location: Portland, Oregon Posts: 6,039	Re: Model A Mallory Ignition at Bubbas Sponsored Links (Register now to hide all advertisements) Those Mallorys might be great but they're way too complicated for this old guy to work on. Glad a place like Bubba's exists to help. __________________ Ray Horton, Portland, OR As you go through life, keep your eye on the donut, not the hole.

02-14-2016, 03:28 PM	#7
colin1928 Senior Member Join Date: Mar 2013 Location: Australa Melbourne Posts: 878	Re: Model A Mallory Ignition at Bubbas AS always great work Jim

02-15-2016, 11:30 AM	#10
Flathead Senior Member Join Date: May 2010 Location: Southern Maine Posts: 1,696	Re: Model A Mallory Ignition at Bubbas Is one with a cast iron body unusual?

02-15-2016, 01:13 PM	#11
Rowdy BANNED Join Date: May 2010 Location: Gothenburg Nebraska Just off I-80 Posts: 4,893	Re: Model A Mallory Ignition at Bubbas I have more cast iron bodied Mallory's than aluminum. I think they are more plentiful. Used on Gleaner Combines and other industrial applications. Mostly the same components inside and most seem to be single point instead of dual point. Rod __________________ Do the RIGHT thing - Support the H.A.M.B. Alliance!!!!

02-15-2016, 05:27 PM	#12
Flathead Senior Member Join Date: May 2010 Location: Southern Maine Posts: 1,696	Re: Model A Mallory Ignition at Bubbas Thanks, I have one of each and always wondered about it.