Model A Mallory Ignition at Bubbas
 

Had a Model A sat rebuilding a Mallory distributor for the Model A....More info and pictures of the build at

http://www.bubbasignition.com/pictures.html

Site has pictures and a Model A page as well under bangers...:eek:

Re: Model A Mallory Ignition at Bubbas
 

Thanks for sharing Bubba. Nice work!

Re: Model A Mallory Ignition at Bubbas
 

Hey Jim,
Thanks for sharing, yet again :) !
I've got one (four cyl Mallory marine engine) that I must eventually send to you for same.

Re: Model A Mallory Ignition at Bubbas
 

Your email is not working

Re: Model A Mallory Ignition at Bubbas
 

I have 5 or 6 of the YA 11A's. In a couple of years I will probably send you two of them for rebuilding. Will set the rest back for future use. Hope to have the same results. Rod

Re: Model A Mallory Ignition at Bubbas
 

Those Mallorys might be great but they're way too complicated for this old guy to work on. Glad a place like Bubba's exists to help.

Re: Model A Mallory Ignition at Bubbas
 

AS always great work Jim

Re: Model A Mallory Ignition at Bubbas
 

Have an original Mallory but too many pieces need replaced or are missing....got one of bubba's and love it. Only change I made was making my own wires for it. Best distributor I've ever used!

Re: Model A Mallory Ignition at Bubbas
 

Yup, got one of those also ! He does nice work, indeed :)
Nice wire color selection.

Re: Model A Mallory Ignition at Bubbas
 

Is one with a cast iron body unusual?

Re: Model A Mallory Ignition at Bubbas
 

I have more cast iron bodied Mallory's than aluminum. I think they are more plentiful. Used on Gleaner Combines and other industrial applications. Mostly the same components inside and most seem to be single point instead of dual point. Rod

Re: Model A Mallory Ignition at Bubbas
 

Thanks, I have one of each and always wondered about it.

Re: Model A Mallory Ignition at Bubbas
 

use a pm here on the barn or [email protected] i am working on the site email..