Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 01-24-2016, 10:52 PM   #2
alanwoodieman
Senior Member
 
Join Date: May 2010
Location: upstate SC
Posts: 3,006
Default Re: '41 ford pickup ID #

when the engine/trans was assembled at the Rouge numbers were stamped into the bell housing part of the transmission. this number was stamped into the frame at three locations, near steering box, under drivers door and on the upward dogleg of the ds frame, at least that is where they were supposed to be. 9N was the designate of the 4 cylinder tractor engine that was installed in the truck, these engines originally had a number stamped around the starter/Bendix area, on one of my original 4 cylinder trucks the serial number begins with 9N xxxx with 3 speed trans the other began with a 11T xxxx with a 4 speed trans. does your truck have the dropped front cross member?
alanwoodieman is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 11:09 AM.