The Ford Barn

Ian NZ · 11-17-2015, 07:27 PM

I fitted a 3 pound Skip Haney valve onto the overflow tube on the radiator of my 32 I then I installed Bars leaks pellet type which is the only one available here into the radiator, the Bars leaks blocked the 3 pound valve and pressurized the radiator which blew a small hole in the top tank. I would not install this type of Bars leak into my V8 Radiators again. Now I just install the 'Red line' water wetter and the 'Gunk' Anti-Rust & Water Pump Lube which takes the place of the Bars Leaks pump lube. into the radiator water.

11-17-2015, 07:27 PM	#8
Ian NZ Senior Member Join Date: May 2010 Location: Taranaki, New Zealand Posts: 924	Re: My Thanks To GM I fitted a 3 pound Skip Haney valve onto the overflow tube on the radiator of my 32 I then I installed Bars leaks pellet type which is the only one available here into the radiator, the Bars leaks blocked the 3 pound valve and pressurized the radiator which blew a small hole in the top tank. I would not install this type of Bars leak into my V8 Radiators again. Now I just install the 'Red line' water wetter and the 'Gunk' Anti-Rust & Water Pump Lube which takes the place of the Bars Leaks pump lube. into the radiator water.