The Ford Barn

Steve Plucker · 04-05-2019, 09:03 PM

What is your preference...

Assembling the Transmission Main drive gear ball bearing and the Transmission main shaft ball bearing:

1. Leaving both bearings sealed on each side;

2. Leaving both bearings sealed on one side only;

3. Using non-sealed bearings.

Thanks.

Pluck

Joe K · 04-05-2019, 10:07 PM

Sealed one side open to the inside of the tranny.

Joe K

Glen in Hillman MI · 04-06-2019, 08:51 AM

Open to inside

Jim Brierley · 04-06-2019, 11:24 AM

Sponsored Links (Register now to hide all advertisements)

As above, retain the stock slinger behind the bearing, it also acts as a spacer.

04-05-2019, 09:03 PM	#1
Steve Plucker BANNED Join Date: May 2010 Location: Walla Walla, Washington USA Posts: 6,066	Transmission Main shaft bearings... What is your preference... Assembling the Transmission Main drive gear ball bearing and the Transmission main shaft ball bearing: 1. Leaving both bearings sealed on each side; 2. Leaving both bearings sealed on one side only; 3. Using non-sealed bearings. Thanks. Pluck

04-05-2019, 10:07 PM	#2
Joe K Senior Member Join Date: Jul 2010 Location: Cow Hampshire Posts: 5,013	Re: Transmission Main shaft bearings... Sealed one side open to the inside of the tranny. Joe K __________________ Shudda kept the horse.

04-06-2019, 08:51 AM	#3
Glen in Hillman MI Senior Member Join Date: May 2010 Posts: 107	Re: Transmission Main shaft bearings... Open to inside

04-06-2019, 11:24 AM	#4
Jim Brierley Senior Member Join Date: Jun 2010 Location: Temecula, CA Posts: 4,321	Re: Transmission Main shaft bearings... Sponsored Links (Register now to hide all advertisements) As above, retain the stock slinger behind the bearing, it also acts as a spacer.