The Ford Barn

charles in east texas · 05-13-2010, 02:47 PM

Has anyone tried one of these aluminum radiators made by Wizard Cooling located in New York. Especially in a say 49-53 ford with flathead. Thanks, Charles

.

cosmo · 05-13-2010, 09:32 PM

I don't know about wizard company but my aluminum radiator for my 50 came from a place in AZ. Not cheap but a very nice job plus no more cooling issues.

dirt t · 05-13-2010, 10:29 PM

Quote:

Originally Posted by cosmo

I don't know about wizard company but my aluminum radiator for my 50 came from a place in AZ. Not cheap but a very nice job plus no more cooling issues.

Brian at Custom aluminum radiator in Kingman,AZ
4805 E Finance way
928-681-6716
Make's a hell of a product.

41PICUP · 05-22-2010, 08:46 AM

I got my aliminum radiator from Don Hudges, 8407 N. 53rd Ave. Glendale AZ 85301
623-931-0135 He's at some of the Goodguy's shows.

Charlie ny · 05-22-2010, 09:00 AM

Charles,
Wizard is 5 minutes from me....716 655 6760....in West Falls NY.
Lots of their radiators on the road in this area. My buddy has a '51 sedan
with a '53 Merc warmed up and is very happy with his Wizard radiator.
Charlie ny

flathead4rd · 05-22-2010, 10:31 AM

Sponsored Links (Register now to hide all advertisements)

I got the Super Cooler radiator from Jamco. It's copper, not aluminum. Around $425 if I remember right.

KiWinUS · 05-22-2010, 12:27 PM

whats it in flathead4rd ?

hbleadsled · 05-25-2010, 09:30 PM

I got my aluminum radiator with fan and recoverey tank polished from Don Hodges, (AM )aluminum radiators, 1241 Cheryl dr. Phoenix Az. ,(602) 424-4249 very nice. he goes to good guys car shows like ,Pleasanton, Ca.

El Hoppy · 05-26-2010, 01:45 AM

I put a wizard in mine, not exactly a bolt in, I had to trim it a little and some holes didn't line up but the inlet and outlet are spot on and it works great! very nice welding, I would recommend them.

05-13-2010, 02:47 PM	#1
charles in east texas Senior Member Join Date: May 2010 Location: Winnsboro, Texas Posts: 463	Aluminum Radiator by Wizard Cooling Has anyone tried one of these aluminum radiators made by Wizard Cooling located in New York. Especially in a say 49-53 ford with flathead. Thanks, Charles.

05-13-2010, 09:32 PM	#2
cosmo Junior Member Join Date: May 2010 Posts: 11	Re: Aluminum Radiator by Wizard Cooling I don't know about wizard company but my aluminum radiator for my 50 came from a place in AZ. Not cheap but a very nice job plus no more cooling issues.

05-22-2010, 08:46 AM	#4
41PICUP Senior Member Join Date: May 2010 Location: El Cerrito CA Posts: 338	Re: Aluminum Radiator by Wizard Cooling I got my aliminum radiator from Don Hudges, 8407 N. 53rd Ave. Glendale AZ 85301 623-931-0135 He's at some of the Goodguy's shows.

05-22-2010, 09:00 AM	#5
Charlie ny BANNED Join Date: May 2010 Posts: 3,019	Re: Aluminum Radiator by Wizard Cooling Charles, Wizard is 5 minutes from me....716 655 6760....in West Falls NY. Lots of their radiators on the road in this area. My buddy has a '51 sedan with a '53 Merc warmed up and is very happy with his Wizard radiator. Charlie ny

05-22-2010, 10:31 AM	#6
flathead4rd Senior Member Join Date: May 2010 Location: Michigan Posts: 506	Re: Aluminum Radiator by Wizard Cooling Sponsored Links (Register now to hide all advertisements) I got the Super Cooler radiator from Jamco. It's copper, not aluminum. Around $425 if I remember right.

05-22-2010, 12:27 PM	#7
KiWinUS Senior Member Join Date: May 2010 Location: Charlotte NC KiWi-L100 available here Posts: 2,983	Re: Aluminum Radiator by Wizard Cooling whats it in flathead4rd ?

05-25-2010, 09:30 PM	#8
hbleadsled Senior Member Join Date: May 2010 Location: salinas ca. Posts: 266	Re: Aluminum Radiator by Wizard Cooling I got my aluminum radiator with fan and recoverey tank polished from Don Hodges, (AM )aluminum radiators, 1241 Cheryl dr. Phoenix Az. ,(602) 424-4249 very nice. he goes to good guys car shows like ,Pleasanton, Ca.

05-26-2010, 01:45 AM	#9
El Hoppy Junior Member Join Date: May 2010 Location: Los Aneles Ca. Posts: 14	Re: Aluminum Radiator by Wizard Cooling I put a wizard in mine, not exactly a bolt in, I had to trim it a little and some holes didn't line up but the inlet and outlet are spot on and it works great! very nice welding, I would recommend them. __________________ better then most, not as good as some.