The Ford Barn

oldford2 · 08-10-2010, 05:14 PM

New rebuild on a 40 221. New: pistons, bearings, valves, guides, adj. lifters, nos original "tin can" sleeves, Skips pumps, all accessories Rebuilt carb, gen, Distributor, fuel pump, etc. On an engine stand so come and see/ hear it purr.

John, Phone 413-441-3449 [email protected]

oldford2 · 08-11-2010, 03:27 PM

added picture

oldford2 · 11-03-2010, 06:34 PM

All set to go.

ken ct · 11-03-2010, 06:46 PM

Looks good John,love your gas tank set up,neat.Hopefully i wont need one but. ken ct. I assume the longer screw did the trick,no leaks gas or air?? ken ct.

oldford2 · 11-04-2010, 06:04 AM

KenCT, I had to winterize the engine yesterday so added antifreeze and put on the carb. Started her up to mix the antifreeze. Started first turn. I had put a couple of ounces of gas down the tube to fill the bowl. Still looking for a 39-41 pickup to put it in. Thanks for your carb help. No gas or air leaks. John

David W Juliano · 11-04-2010, 07:48 AM

Sponsored Links (Register now to hide all advertisements)

Is everything in the picture included in the purchase price?

40fordpu · 11-04-2010, 08:24 AM

Does the radiator and stand come with the engine for that price?

oldford2 · 11-04-2010, 11:22 AM

The stand does not go with the engine. I need if for my next rebuild. The radiator stays with the stand. It is not a good one anyway. If you don't need the carb, distributor or generator you can take $400 of the price. John

David W Juliano · 11-21-2010, 02:12 PM

John: If the engine is still available, I'm interested in buying it. I'd like to come up and hear it run before I buy. [email protected]

Ken Crans · 11-21-2010, 08:03 PM

Hey John, I am going to Indiana on Thanksgiving weekend to buy a 40 Ford pickup! I'm very excited! That 221 would be sweet in there! Ken

08-10-2010, 05:14 PM	#1
oldford2 Senior Member Join Date: May 2010 Location: pittsfield, MA Posts: 2,087	40 rebuilt engine City: pittsfield State: ma Price: $2600 New rebuild on a 40 221. New: pistons, bearings, valves, guides, adj. lifters, nos original "tin can" sleeves, Skips pumps, all accessories Rebuilt carb, gen, Distributor, fuel pump, etc. On an engine stand so come and see/ hear it purr. John, Phone 413-441-3449 [email protected] Last edited by oldford2; 11-04-2010 at 07:09 AM.

08-11-2010, 03:27 PM	#2
oldford2 Senior Member Join Date: May 2010 Location: pittsfield, MA Posts: 2,087	Re: 40 rebuilt engine added picture

11-03-2010, 06:34 PM	#3
oldford2 Senior Member Join Date: May 2010 Location: pittsfield, MA Posts: 2,087	Re: 40 rebuilt engine All set to go.

11-03-2010, 06:46 PM	#4
ken ct BANNED Join Date: May 2010 Location: stratford,ct Posts: 5,971	Re: 40 rebuilt engine Looks good John,love your gas tank set up,neat.Hopefully i wont need one but. ken ct. I assume the longer screw did the trick,no leaks gas or air?? ken ct.

11-04-2010, 06:04 AM	#5
oldford2 Senior Member Join Date: May 2010 Location: pittsfield, MA Posts: 2,087	Re: 40 rebuilt engine KenCT, I had to winterize the engine yesterday so added antifreeze and put on the carb. Started her up to mix the antifreeze. Started first turn. I had put a couple of ounces of gas down the tube to fill the bowl. Still looking for a 39-41 pickup to put it in. Thanks for your carb help. No gas or air leaks. John

11-04-2010, 07:48 AM	#6
David W Juliano Member Join Date: May 2010 Posts: 30	Re: 40 rebuilt engine Sponsored Links (Register now to hide all advertisements) Is everything in the picture included in the purchase price?

11-04-2010, 08:24 AM	#7
40fordpu Senior Member Join Date: Jun 2010 Location: Murrieta, CA Posts: 637	Re: 40 rebuilt engine Does the radiator and stand come with the engine for that price?

11-04-2010, 11:22 AM	#8
oldford2 Senior Member Join Date: May 2010 Location: pittsfield, MA Posts: 2,087	Re: 40 rebuilt engine The stand does not go with the engine. I need if for my next rebuild. The radiator stays with the stand. It is not a good one anyway. If you don't need the carb, distributor or generator you can take $400 of the price. John

11-21-2010, 02:12 PM	#9
David W Juliano Member Join Date: May 2010 Posts: 30	Re: 40 rebuilt engine John: If the engine is still available, I'm interested in buying it. I'd like to come up and hear it run before I buy. [email protected]

11-21-2010, 08:03 PM	#10
Ken Crans Senior Member Join Date: May 2010 Location: Highland,MI Posts: 1,196	Re: 40 rebuilt engine Hey John, I am going to Indiana on Thanksgiving weekend to buy a 40 Ford pickup! I'm very excited! That 221 would be sweet in there! Ken