The Ford Barn

arthur · 10-18-2010, 04:55 PM

i'm considering replacing the distributor with a rebuilt on my 40 ford v8. the heads on the engine have an A on them so i think its the original engine, but the distributor and coil are seperate and some illustrations i've seen don't match up..my distributor is a 2 bolt and the cap isn't a crab type, but a round with two flutes for the s/p wires...???

Lanny · 10-18-2010, 09:46 PM

Sponsored Links (Register now to hide all advertisements)

hi arthur, please scroll down about 3 or 4 inches, and look
for a thread I started named, "READ THIS before you post a question"

You will get alot more people to read your post, if listed in the correct section.
hope this helps.....

.

10-18-2010, 04:55 PM	#1
arthur Junior Member Join Date: May 2010 Location: bakersfield, vermont Posts: 19	1940 ford super deluxe i'm considering replacing the distributor with a rebuilt on my 40 ford v8. the heads on the engine have an A on them so i think its the original engine, but the distributor and coil are seperate and some illustrations i've seen don't match up..my distributor is a 2 bolt and the cap isn't a crab type, but a round with two flutes for the s/p wires...???

10-18-2010, 09:46 PM	#2
Lanny Senior Member Join Date: May 2010 Location: Montevideo, MN. Posts: 2,570	Re: 1940 ford super deluxe Sponsored Links (Register now to hide all advertisements) hi arthur, please scroll down about 3 or 4 inches, and look for a thread I started named, "READ THIS before you post a question" You will get alot more people to read your post, if listed in the correct section. hope this helps..... . __________________ If mama ain't happy, ain't nobody happy. But if daddy ain't happy...RUN What I GOT DONE TODAY... I got the rear-end put in the recliner, and now I'm going to rest up & watch TV.