The Ford Barn

RockHillWill · 09-09-2014, 06:41 AM

Mitch, Glad you got it to work, I am not much good at computer 'issues'.

Brent: I just got back last night. The car we were 3D scanning is a 1935 Bugatti Type57, Serial#57314. The 3D scanning is a labor intensive job to prepare, more than the actual scanning and uses a HUGE amount of both RAM and hard drive. I just bought a new laptop to get the 16 GIG and 500 GIG hard drive to be able to work with the file size needed. We got separate scans of the fenders, grille and a few minor body panels that were easily captured and saved, but the full body scan (one side only) just about maxed out the computers speed and storage ability.

WillDans 013sm.jpg

SANY0071sm.jpg

09-09-2014, 06:41 AM	#11
RockHillWill Senior Member Join Date: May 2010 Location: Rock Hill, S.C. Posts: 985	Re: I could not sit idle, have a new project Mitch, Glad you got it to work, I am not much good at computer 'issues'. Brent: I just got back last night. The car we were 3D scanning is a 1935 Bugatti Type57, Serial#57314. The 3D scanning is a labor intensive job to prepare, more than the actual scanning and uses a HUGE amount of both RAM and hard drive. I just bought a new laptop to get the 16 GIG and 500 GIG hard drive to be able to work with the file size needed. We got separate scans of the fenders, grille and a few minor body panels that were easily captured and saved, but the full body scan (one side only) just about maxed out the computers speed and storage ability. WillDans 013sm.jpg SANY0071sm.jpg __________________ Uncle Bud says "too soon old, too late smart!"