Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 06-21-2014, 03:06 PM   #18
DavidG
Senior Member
 
DavidG's Avatar
 
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,670
Default Re: Model B frame questions

I take back what I said about being able to repair the front cross member without removing it from the side rails. There's been a whole lot of fix'n going on with this cross member.

You can rest assured that the nice matching of the bolts is nothing but a coincidence as this is very likely not the original front cross member, nor the front motor mount bracket. With your legless center cross member, I would expect to see a front cross member and front motor mount bracket spacing on centers of 15 inches, not the 12 inch spacing in your photos. Given the extent of the modifications, including to the back of the cross member in the center, I can't say if it is an early so-called flat cross member (as opposed to the super-early, Model B only, 'flat' front cross member with 15" on center spacing.

Examples of the 15" and 12" spacing cross members and front motor mount brackets are shown in the photos below.
Attached Images
File Type: jpg Book photos 101.jpg (40.6 KB, 34 views)
File Type: jpg Book photos 144.jpg (30.3 KB, 31 views)
File Type: jpg Book photos 145.jpg (35.8 KB, 35 views)
File Type: jpg Book photos 099.jpg (26.0 KB, 26 views)
DavidG is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 11:21 PM.