The Ford Barn

Bud BC · 12-12-2013, 08:11 PM

For comfort sake I would like to change the pedal angle but don't know if I can heat and bend or have to cold bend the pedal arm, which is safest way to go?
Thanks.

quickchange · 12-12-2013, 08:54 PM

heat & bend .

BRENT in 10-uh-C · 12-12-2013, 09:12 PM

Yes, as Derek says, "heat and bend".

George Miller · 12-13-2013, 11:10 AM

Sponsored Links (Register now to hide all advertisements)

Yes heat and bend. I have bent them before.

12-12-2013, 08:11 PM	#1
Bud BC Junior Member Join Date: May 2010 Location: Surrey, British Columbia Posts: 13	Brake and clutch pedal arms bending For comfort sake I would like to change the pedal angle but don't know if I can heat and bend or have to cold bend the pedal arm, which is safest way to go? Thanks.

12-12-2013, 08:54 PM	#2
quickchange Senior Member Join Date: May 2010 Location: Nelson. New Zealand Posts: 2,069	Re: Brake and clutch pedal arms bending heat & bend .

12-12-2013, 09:12 PM	#3
BRENT in 10-uh-C Senior Member Join Date: May 2010 Location: Eastern Tennessee Posts: 12,246	Re: Brake and clutch pedal arms bending Yes, as Derek says, "heat and bend". __________________ . BRENT in 10-uh-C . www.model-a-ford.com ...(...Finally Updated!! ) .

12-13-2013, 11:10 AM	#4
George Miller Senior Member Join Date: May 2010 Location: NC Posts: 2,975	Re: Brake and clutch pedal arms bending Sponsored Links (Register now to hide all advertisements) Yes heat and bend. I have bent them before.