The Ford Barn

borob47 · 10-11-2013, 07:59 PM

I am looking for rear tail light assembly and a horn ring center . Also I would greatly appreciate it if any of you guys could lead me to info on putting a 302 and c-4 in this car ? Thanks in advance Bob
[email protected]

Dobie Gillis · 10-12-2013, 05:51 PM

Try these guys. No guarantees, but I've had good luck with 'em...

http://stores.ebay.com/RPM-Motorspor...=p4634.c0.m322

https://fiftiesfords.com/

I can't advise on an engine swap, decided to keep the y-block. Maybe somebody else will chime in on that.

mercabago55 · 11-25-2013, 08:50 AM

Sponsored Links (Register now to hide all advertisements)

You can put a 302 in very easy,you need a rear sump oil pan and parts from a truck and rig up some mounts similar to 1964 Ford.Did it once,good choice too or a 351 windsor works well too. Good luck.

10-11-2013, 07:59 PM	#1
borob47 Junior Member Join Date: Jun 2010 Posts: 3	1955 Merc Montclair 2 door hardtop parts needed I am looking for rear tail light assembly and a horn ring center . Also I would greatly appreciate it if any of you guys could lead me to info on putting a 302 and c-4 in this car ? Thanks in advance Bob [email protected]

10-12-2013, 05:51 PM	#2
Dobie Gillis Senior Member Join Date: May 2012 Location: Middle TN Posts: 1,060	Re: 1955 Merc Montclair 2 door hardtop parts needed Try these guys. No guarantees, but I've had good luck with 'em... http://stores.ebay.com/RPM-Motorspor...=p4634.c0.m322 https://fiftiesfords.com/ I can't advise on an engine swap, decided to keep the y-block. Maybe somebody else will chime in on that.

11-25-2013, 08:50 AM	#3
mercabago55 Member Join Date: Jul 2010 Location: Roebuck SC Posts: 50	Re: 1955 Merc Montclair 2 door hardtop parts needed Sponsored Links (Register now to hide all advertisements) You can put a 302 in very easy,you need a rear sump oil pan and parts from a truck and rig up some mounts similar to 1964 Ford.Did it once,good choice too or a 351 windsor works well too. Good luck.