The Ford Barn

Gord. B by the bay · 04-25-2013, 05:43 PM

On the tranny I disliked to have to crawl under the car to check the level, I cut a 3" square hole in the floor board just above the plug wich is 3/4" pipe thread remove the plug and screw in a 3/4 by 5" nipple with the a 3/4" pipe cap on hand tight. go to a autowrecker and get a dip stick that will sit in the pipe to check your level if you have to add do so to the right level then screw the cap back on and keep your dipdtick under the floor mat cover the square hole you cut for the opening cover with a piece of metal with a screw in one corner so it will swing out of the when you want to check the level works well for me Gord.B by the Bay

04-25-2013, 05:43 PM	#15
Gord. B by the bay Senior Member Join Date: May 2010 Location: Owen Sound Ont. Canada Posts: 198	Re: Refilling Differential On the tranny I disliked to have to crawl under the car to check the level, I cut a 3" square hole in the floor board just above the plug wich is 3/4" pipe thread remove the plug and screw in a 3/4 by 5" nipple with the a 3/4" pipe cap on hand tight. go to a autowrecker and get a dip stick that will sit in the pipe to check your level if you have to add do so to the right level then screw the cap back on and keep your dipdtick under the floor mat cover the square hole you cut for the opening cover with a piece of metal with a screw in one corner so it will swing out of the when you want to check the level works well for me Gord.B by the Bay