The Ford Barn

Ghengis Kong · 03-23-2012, 08:53 PM

I'm looking at a vic that needs the floorpans replaced and I am looking for a worthy replacement. Further projects will use art morrison front and rear frame sections and a windsor based motor to replace the venerable y-block.

rick55 · 03-23-2012, 09:02 PM

Most of the restoration parts houses stock the floor pans - Macs Auto Parts, Concours Parts, Dennis Carpenter, etc.. Theya are all much the same quality and price. I think EMS probably supply them all.
Regards

Ghengis Kong · 03-23-2012, 09:05 PM

Excellent

blucar · 03-24-2012, 11:27 AM

EMS in Cleveland has a great supply of body patch panels... They specialize in Ford/Chevy... All of their panels are made in the US.... I just purchased floor pans, cross braces and some fender patch panels for a '49 Old's (same as Chevy) I am working on..
EMC was the only company that had the floor pan cross braces.
I talked to about every vendor in the US before I found EMC through an info seek on google... Their catalog is online with very good pix.....

frank long island · 03-24-2012, 07:10 PM

i got front and rear for my wagon from classic fabracation in surfside beach south carolina

rick55 · 03-24-2012, 07:39 PM

Sponsored Links (Register now to hide all advertisements)

EMS Customer Service is a member of the HAMB and provide technical service and support over the phone. They are a member of the 52-56 Ford Cars Community.
Regards

1pieceatatime · 03-25-2012, 09:00 AM

i found toe pans, floor pans and trans tunnel from american muscle for my 58 ford. they were reasonably priced, good quality and i was really happy with how well they fit. i found them on ebay but i think they have a web site of their own.

03-23-2012, 08:53 PM	#1
Ghengis Kong Junior Member Join Date: Mar 2012 Location: OK Posts: 3	Where to get sheet metal for the floorpan of a 1956 vic I'm looking at a vic that needs the floorpans replaced and I am looking for a worthy replacement. Further projects will use art morrison front and rear frame sections and a windsor based motor to replace the venerable y-block.

03-23-2012, 09:05 PM	#3
Ghengis Kong Junior Member Join Date: Mar 2012 Location: OK Posts: 3	Re: Where to get sheet metal for the floorpan of a 1956 vic Excellent

03-24-2012, 11:27 AM	#4
blucar Senior Member Join Date: Jul 2010 Location: Ventura, CA Posts: 2,466	Re: Where to get sheet metal for the floorpan of a 1956 vic EMS in Cleveland has a great supply of body patch panels... They specialize in Ford/Chevy... All of their panels are made in the US.... I just purchased floor pans, cross braces and some fender patch panels for a '49 Old's (same as Chevy) I am working on.. EMC was the only company that had the floor pan cross braces. I talked to about every vendor in the US before I found EMC through an info seek on google... Their catalog is online with very good pix..... __________________ Bill.... 36 5 win cpe

03-24-2012, 07:10 PM	#5
frank long island Senior Member Join Date: May 2010 Location: westbury ny Posts: 854	Re: Where to get sheet metal for the floorpan of a 1956 vic i got front and rear for my wagon from classic fabracation in surfside beach south carolina

03-25-2012, 09:00 AM	#7
1pieceatatime Junior Member Join Date: Mar 2012 Location: rhode island Posts: 16	Re: Where to get sheet metal for the floorpan of a 1956 vic i found toe pans, floor pans and trans tunnel from american muscle for my 58 ford. they were reasonably priced, good quality and i was really happy with how well they fit. i found them on ebay but i think they have a web site of their own.