|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-09-2012, 02:20 PM | #1 |
Senior Member
Join Date: May 2010
Location: Worcester , Mass
Posts: 300
|
1932 Clutch & Brake pedal shaft
City:
Worcester
State:
MA
I need a 32 to 34 Ford passenger car clutch and brake pedal shaft its about 5&5/16 inches long. I already have the bushings but every place I called says the same thing, that they are all out and don't have a time frame when they will be restocked. Can someone hook me up? I don't want a used one thanx I already have one of those . Send me some pix and PM if you can help
__________________
[email protected] |
03-09-2012, 02:50 PM | #2 |
Senior Member
Join Date: May 2010
Location: Southern California
Posts: 7,052
|
Re: 1932 Clutch & Brake pedal shaft
If you are looking for the part I think you are try a bearing supply company for a shaft and then have it cut to length.
Charlie Stephens |
Sponsored Links (Register now to hide all advertisements) |
|
03-09-2012, 02:58 PM | #3 |
Senior Member
Join Date: May 2010
Location: Worcester , Mass
Posts: 300
|
Re: 1932 Clutch & Brake pedal shaft
thanx Charlie
__________________
[email protected] |
03-09-2012, 03:22 PM | #4 |
Senior Member
Join Date: May 2010
Location: Kerrville, Tx
Posts: 2,778
|
Re: 1932 Clutch & Brake pedal shaft
I have had success with a piece of 7/8" cold roll bar. It is accurate to size and smooth. Go around to fab shops and beg a piece.
|
03-09-2012, 03:36 PM | #5 |
Senior Member
Join Date: May 2010
Location: Southern California
Posts: 7,052
|
Re: 1932 Clutch & Brake pedal shaft
Another source might be a shaft from a different year that could be cut to length. Or maybe the shaft that mounts the throw out arm. NOS or NORS would probably beat current off shore manufacture.
Charlie Stephens |
03-09-2012, 03:40 PM | #6 |
Senior Member
Join Date: May 2010
Location: Worcester , Mass
Posts: 300
|
Re: 1932 Clutch & Brake pedal shaft
Sponsored Links (Register now to hide all advertisements)
__________________
[email protected] |
03-09-2012, 09:55 PM | #7 |
Senior Member
Join Date: May 2010
Posts: 893
|
Re: 1932 Clutch & Brake pedal shaft
I have n.o.s. ones 19.00 Part number B-7506 plus 5.50 postage
|
03-09-2012, 11:11 PM | #8 |
Senior Member
Join Date: May 2010
Location: Worcester , Mass
Posts: 300
|
Re: 1932 Clutch & Brake pedal shaft
Excellent Can I see a picture of it ? And where do I send the check I will get it in the mail Tomorrow? I am sending you a PM
Thanx Ghost
__________________
[email protected] |
03-10-2012, 06:54 AM | #9 |
Senior Member
Join Date: May 2010
Location: Worcester , Mass
Posts: 300
|
Re: 1932 Clutch & Brake pedal shaft
Many thanks to Fred from MN for hookin me up with the part I need from South Side Obsolete. Payment is on the way
__________________
[email protected] |
|
|
Sponsored Links (Register now to hide all advertisements) |
|