Go Back   The Ford Barn > General Discussion > Model T (1909-1927)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 12-20-2011, 08:47 PM   #3
John Otis
Senior Member
 
John Otis's Avatar
 
Join Date: May 2010
Location: Vermont and Florida
Posts: 188
Send a message via AIM to John Otis Send a message via Yahoo to John Otis
Default Re: Remove steering wheel

You can usually pop the the steering wheel right off but you might need a puller. Any play is too much. These are glorified go-carts and really touchy in the steering department. I have always been a big fan of the spring loaded ball caps in the steering. Usually the steering gears up top don't wear that much. Sometimes the top bushing on the steering shaft (which is also the gearcase) has a lot of slop even though the gears and pins are still tight.. Make sure the steering wheel key is as tight as can be and also the woodruff key on the pitman arm MUST be very snug. Also make sure the ball on the pitman arm is perfectly round.
John Otis is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 07:47 AM.