|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
Thread Tools | Display Modes |
05-30-2026, 12:26 PM
|
#2 |
|
Senior Member
Join Date: Jan 2012
Location: Western North Carolina
Posts: 6,855
|
Re: Should I Worry or JB Weld it?
JB Weld but clean thoroughly with solvent before using the epoxy. It looks like it was caused by something being forced through the housing from the inside. Check to see if there is something loose inside that would cause further damage. A bore scope might be good tool to use.
__________________
A is for apple, green as the sky. Step on the gas, for tomorrow I die. Forget the brakes, they really don't work. The clutch always sticks, and starts with a jerk. My car grows red hair, and flies through the air. Driving's a blast, a blast from the past. |
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
«
Previous Thread
|
Next Thread
»
Threaded Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 06:29 AM.