Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 04-01-2026, 06:34 PM   #1
Ziggster
Senior Member
 
Join Date: Aug 2018
Location: Ottawa, ON
Posts: 1,373
Default Info on dust caps for Wide Five hubs/drums

I recently purchased some wide five hubs / drums (front and rear) and I’m now looking for centre (dust) caps. I found a bunch of the threaded variety from various sources, but wanted to know if these look like the original
Ford versions. Also, regarding the front hubs/drums, one is threaded for the cap and the other is not. Could someone please explain why one is threaded and the other isn’t, and where I can find a non-threaded version? I did find these NOS threaded ones on eBay, but seller says they are 3” in diameter. What would they have been used on?
I should mention that is the rear wheel bolted to the front hub/drum just for a colour comparison pic I took.
Attached Images
File Type: jpg IMG_6058.jpg (66.3 KB, 160 views)
File Type: jpg IMG_6043.jpg (21.6 KB, 164 views)
File Type: jpg IMG_5965.jpg (90.9 KB, 167 views)
File Type: jpg IMG_6061.jpg (55.7 KB, 170 views)
Ziggster is offline   Reply With Quote
Old 04-01-2026, 08:42 PM   #2
petehoovie
Senior Member
 
petehoovie's Avatar
 
Join Date: May 2015
Posts: 11,643
Default Re: Info on dust caps for Wide Five hubs/drums

Quote:
Originally Posted by Ziggster View Post
I recently purchased some wide five hubs / drums (front and rear) and I’m now looking for centre (dust) caps. I found a bunch of the threaded variety from various sources, but wanted to know if these look like the original
Ford versions. Also, regarding the front hubs/drums, one is threaded for the cap and the other is not. Could someone please explain why one is threaded and the other isn’t, and where I can find a non-threaded version? I did find these NOS threaded ones on eBay, but seller says they are 3” in diameter. What would they have been used on?
I should mention that is the rear wheel bolted to the front hub/drum just for a colour comparison pic I took.






__________________


petehoovie is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 04-02-2026, 12:33 AM   #3
nelsb01
Senior Member
 
nelsb01's Avatar
 
Join Date: May 2010
Location: Up North
Posts: 870
Default Re: Info on dust caps for Wide Five hubs/drums

The one for $9.95 is correct.
nelsb01 is offline   Reply With Quote
Old 04-02-2026, 07:18 AM   #4
Terry,OH
Senior Member
 
Terry,OH's Avatar
 
Join Date: May 2010
Posts: 5,394
Default Re: Info on dust caps for Wide Five hubs/drums

Most likely the drum that is not threaded is later Mfg. for an earlier year. The push on caps appear like the thread on without the thread. Not like the 7EQ you have shown.
Terry,OH is offline   Reply With Quote
Old 04-02-2026, 05:22 PM   #5
Ziggster
Senior Member
 
Join Date: Aug 2018
Location: Ottawa, ON
Posts: 1,373
Default Re: Info on dust caps for Wide Five hubs/drums

Ok. Thanks for the info. Much appreciated.
Ziggster is offline   Reply With Quote
Old 04-02-2026, 06:31 PM   #6
Bob C
Senior Member
 
Join Date: May 2010
Location: So Cal
Posts: 9,598
Default Re: Info on dust caps for Wide Five hubs/drums

Sponsored Links (Register now to hide all advertisements)
The 7EQ-1139 (A8TZ-1131-A) Is for a 1948-52 F7, F8.
7EQ-1139 is from a 1948-50 parts book and A8TZ-1131-A is
from a 1948-56 parts book.
Bob C is offline   Reply With Quote
Old 04-03-2026, 09:11 AM   #7
Ziggster
Senior Member
 
Join Date: Aug 2018
Location: Ottawa, ON
Posts: 1,373
Default Re: Info on dust caps for Wide Five hubs/drums

Geeze! Never even heard of an F7/8.
Ziggster is offline   Reply With Quote
Old 04-03-2026, 03:41 PM   #8
nelsb01
Senior Member
 
nelsb01's Avatar
 
Join Date: May 2010
Location: Up North
Posts: 870
Default Re: Info on dust caps for Wide Five hubs/drums

Think cabover and conventional semi and 30-foot trailer
nelsb01 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 01:37 AM.