Stock coil with a Vintage Mallory distributor

[SkylarknMerc]

Originally Posted by tubman

No. The ballast resistor has nothing to do with the distributor. It has to match the coil .You want 3 Ohms totals resistance on a 12 volt system.

If you don't already have a Multi-Meter, get one and familiarize yourself with it's basic functions.

It's a valuable basic tool in your arsenal.

Sorry I said that wrong. I understand, I need to use a Ballast resistor no matter wat with a 12v coil, and I need to run 3ohms resistance coil.

Thanks 😊