3D Printed Ford Battery Case Help

		The Ford Barn > General Discussion > Early V8 (1932-53)
3D Printed Ford Battery Case Help

Sponsored Links (Register now to hide all advertisements)

Thread Tools

Display Modes

01-26-2025, 02:37 AM

#11

WarbirdPhotog

Senior Member

Join Date: Aug 2023

Location: Southern California

Posts: 206

Re: 3D Printed Ford Battery Case Help

Quote:

Originally Posted by 35fordtn

what is you layer thickness? .12mm?

If you want a slightly larger printer that doesnt break the bank, I'd highly recommend the Qidi brand.

You're doing a EXCELLENT job!

Thanks! I have the layer height at 0.08 and the line width at 0.4, which is the lowest I can go with the .4mm nozzle. I can drop that down to .04 and .15 with the .2mm nozzle.

__________________
1940 Ford DeLuxe Fordor Sedan
1944 GPW Jeep

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Sponsored Links (Register now to hide all advertisements)

All times are GMT -5. The time now is 04:25 PM.

The Ford Barn