|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
![]() |
|
Thread Tools | Display Modes |
|
|
#1 |
|
Senior Member
Join Date: May 2010
Posts: 2,024
|
My car has cowl lamps and single hole headlamp reflectors and some really crappy wiring.So looking for new sockets only ones I see are the two bulb parking light sockets/wiring. Is this all that is available in reproduction ? If so you just disconnect the extra socket and wire that your headlamp does not need or is there a supplier for what I need? .Thank You
__________________
"Never complain,never explain"... Henry Ford II |
|
|
|
|
|
#2 |
|
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,670
|
Reproduction '32 headlamp internal wires with one or two bulb sockets have a poor reputations. I go to some lengths to save the originals. Usually the insulation on the wires has deteriorated from heat to the point of falling apart. They can be saved by dipping the bare wires in liquid insulation (also used to create soft handles on tools such as pliers) available at hardware stores.
|
|
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
|
#3 | |
|
Senior Member
Join Date: May 2010
Posts: 2,024
|
Quote:
__________________
"Never complain,never explain"... Henry Ford II Last edited by 37 Coupe; 11-28-2024 at 08:21 AM. |
|
|
|
|
|
|
#4 |
|
Senior Member
Join Date: May 2010
Location: Rockwall TX
Posts: 6,018
|
Sponsored Links (Register now to hide all advertisements)
|
|
|
|
![]() |
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|