Front Brake Hose

[Ken/Alabama]

Anyone have a modern replacement number for the 91A-2079 front wheel brake hoses? Thanks

[325w]

Might look at 53-56 Ford pick up front brakes

[KiWinUS]

Ken you probably don’t want steel braided but if you did all the fittings are available.

[Ken/Alabama]

Originally Posted by KiWinUS

Ken you probably don’t want steel braided but if you did all the fittings are available.

No, just looking for a replacement hose without having to wait a week to get it.

[alanwoodieman]

they are 1/4 inch most modern are 3/16 I think early model ford pick ups 48 to 56

[john in illinois]

Sponsored Links (Register now to hide all advertisements)

I have this info from a post I looked up for wheel cylinders.
https://fordbarn.com/forum/showthrea...3734&showall=1

"Good brake hose for use on Fords Raybestos bh36722" from above

John

[Zax40]

For what vehicle? I have a set new in the box for a '40 I ended up not needing. Napa 78-7600

[Mart]

Just go to Rockauto and look up the parts. They list them.
Raybestos BH7600 for example. I didn't know the number I looked it up.

[Bob C]

Are you sure of that number? I looked in the 1938-40 parts book
and the green parts book and don't see that part number, there
is only a 99A-2079-A.

[Mart]

Ken, please confirm the year and model of the vehicle. Don't want to give bad info.

[Ken/Alabama]

Originally Posted by Mart

Ken, please confirm the year and model of the vehicle. Don't want to give bad info.

40 passenger car.

[Zax40]

These are the ones I have https://www.napaonline.com/en/p/UP_7600