|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
![]() |
|
Thread Tools | Display Modes |
|
|
#21 |
|
Senior Member
Join Date: Jul 2010
Location: 36 miles north of Albany NY
Posts: 3,324
|
Make sure you have good grounds everywhere, they all need to be clean, bright, and tight.
Wire brush under all the ground connections then make sure their tight. |
|
|
|
|
|
#22 |
|
Senior Member
Join Date: May 2010
Location: Nashville
Posts: 286
|
If it were me, I’d replace the coil and condenser. You are getting power to the coil, which is good, but that doesn’t mean it works. These parts have probably gone bad over the last 60 years. You have gotten spark once, and it may have been all the coil/condenser could muster before giving up the ghost. You’re close!
People exclusively use Skip Haney’s rebuilt coils, and people get their condensers from the user, Tubman, here and from Third Gen Auto in TN if you call and ask which one to buy.
__________________
Cars and metal rust away and are destroyed, but the Word of God will stand forever (Isaiah 40:8, Matthew 24:35). |
|
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
|
#23 |
|
Senior Member
|
Skip will be down for the count for six weeks, knee replacement.
__________________
Tim Carlig |
|
|
|
|
|
#24 |
|
Senior Member
Join Date: May 2015
Posts: 11,647
|
Does Skip have an apprentice?
|
|
|
|
![]() |
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|