The Ford Barn

rottenron36 · 10-06-2023, 09:16 AM

I am missing a few areas of tack strip material for headliner and wind lace, on my 39 2 dr sedan. I'm not sure if it is available, or if that is the correct name. Any information, and or help appreciated. Thanks Ron

marko39 · 10-06-2023, 10:18 AM

I got some from drake a few years ago, may be still available.

19Fordy · 10-06-2023, 10:47 AM

I bought mine years ago from:
https://www.restorationspecialties.com/

Bruce_MO · 10-06-2023, 07:56 PM

Sponsored Links (Register now to hide all advertisements)

I’ll admit I cheated long ago to make some tack strip material for a headliner install in a Model A… I just glued two or three layers of panel board scraps together that I had left over from the interior install. The Model A tack strip was wider than what I could find from vendors, and the remnants I had looked like cardboard anyway. The later stuff seems to be more dense, though. But my cardboard is still holding fine after 15 years. I did ensure that the glued layers were thoroughly dry before installing.

10-06-2023, 09:16 AM	#1
rottenron36 Senior Member Join Date: May 2012 Location: Corbett OR Posts: 247	1939 ford headliner, wind lace tack strip material I am missing a few areas of tack strip material for headliner and wind lace, on my 39 2 dr sedan. I'm not sure if it is available, or if that is the correct name. Any information, and or help appreciated. Thanks Ron Last edited by rottenron36; 10-06-2023 at 09:18 AM. Reason: forgot the year

10-06-2023, 10:18 AM	#2
marko39 Senior Member Join Date: Oct 2016 Location: harpursville ny Posts: 1,172	Re: 1939 ford headliner, wind lace tack strip material I got some from drake a few years ago, may be still available.

10-06-2023, 10:47 AM	#3
19Fordy Senior Member Join Date: May 2010 Location: Coral Springs FL Posts: 11,916	Re: 1939 ford headliner, wind lace tack strip material I bought mine years ago from: https://www.restorationspecialties.com/

10-06-2023, 07:56 PM	#4
Bruce_MO Senior Member Join Date: May 2010 Posts: 592	Re: 1939 ford headliner, wind lace tack strip material Sponsored Links (Register now to hide all advertisements) I’ll admit I cheated long ago to make some tack strip material for a headliner install in a Model A… I just glued two or three layers of panel board scraps together that I had left over from the interior install. The Model A tack strip was wider than what I could find from vendors, and the remnants I had looked like cardboard anyway. The later stuff seems to be more dense, though. But my cardboard is still holding fine after 15 years. I did ensure that the glued layers were thoroughly dry before installing.