Tread width

[elmo771]

I hate being a pain for asking so many questions . But i need a measurement from center to center of the front tires. I want to setup the ramps on my Quick lift.

[miker98038]

We should know the model and year of the car or truck, and if it’s a Merc or a Lincoln. I think some are the same, but the time to find out isn’t when you try to drive on. I’ve got a friend who’s made that mistake.

[miker98038]

I just saw your other post for a 56 car. Try this chart, near the bottom.

https://www.velocityjournal.com/jour...76/specsg.html

[elmo771]

Thanks for the chart, sorry about not including all the information

[miker98038]

We worry about the question, and forget the background info. No worries. Going back into your profile and adding your general location helps. Eventually the answer to a question will vary if you’re in Florida or Denver.

Ask away. Unless you’re putting a Chevy motor in it, that’s kind of a stretch here.

[JeffB2]

Sponsored Links (Register now to hide all advertisements)

Here is another chart with full specs, I guess you want the track width. https://www.automobile-catalog.com/c...html#gsc.tab=0