The Ford Barn

Asron82 · 07-11-2022, 10:52 AM

Hi all,

I have a zenith carb with brass Throttle lever and i need to replace the Throttle shaft the old one is worn and i wanted the keep the original brass lever so i bought a replace shaft i tried to use a punch and flare the brass but that ended up with a bent shaft lol. Anyone have any ideal on how to do it?

katy · 07-12-2022, 10:22 AM

Sponsored Links (Register now to hide all advertisements)

95/5 solder might work.

07-11-2022, 10:52 AM	#1
Asron82 Junior Member Join Date: Nov 2014 Location: Texas Posts: 13	install Throttle shaft to Lever Hi all, I have a zenith carb with brass Throttle lever and i need to replace the Throttle shaft the old one is worn and i wanted the keep the original brass lever so i bought a replace shaft i tried to use a punch and flare the brass but that ended up with a bent shaft lol. Anyone have any ideal on how to do it?

07-12-2022, 10:22 AM	#2
katy Senior Member Join Date: Jun 2015 Location: Red Deer, Alberta Posts: 5,085	Re: install Throttle shaft to Lever Sponsored Links (Register now to hide all advertisements) 95/5 solder might work. __________________ If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn!