Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)
Reload this Page Placement of plug wires in rotor caps

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 05-14-2021, 09:13 PM   #1
Steve Seidl
Senior Member
 
Steve Seidl's Avatar
 
Join Date: May 2010
Location: Ham Lake,Minn
Posts: 125
Red face Placement of plug wires in rotor caps
Does someone have a diagram -sideview looking into each side of distributor- showing placement of plug wires into cap? I want to be correct fist time, no do overs. I have a persistent miss in motor trying to track down. Tanks in advance!! Steve
Steve Seidl is offline   Reply With Quote
Old 05-14-2021, 09:37 PM   #2
petehoovie
Senior Member
 
petehoovie's Avatar
 
Join Date: May 2015
Posts: 11,644
Default Re: Placement of plug wires in rotor caps
Does this help?


__________________
Last edited by petehoovie; 05-14-2021 at 09:43 PM.
petehoovie is online now   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 05-14-2021, 10:39 PM   #3
koates
Senior Member
 
Join Date: May 2010
Location: Melbourne Australia.
Posts: 2,218
Default Re: Placement of plug wires in rotor caps
The brass high tension plug wire sockets are numbered in the plastic for either right or left cylinder bank plugs. You really cant get it wrong, can you? Regards, Kevin.
koates is offline   Reply With Quote
Old 05-14-2021, 11:06 PM   #4
Graham Freeman
Senior Member
 
Join Date: May 2010
Location: New Zealand
Posts: 350
Default Re: Placement of plug wires in rotor caps
Kevin,
Some of the aftermarket caps do not always have this feature.
Graham
Graham Freeman is offline   Reply With Quote
Old 05-14-2021, 11:22 PM   #5
koates
Senior Member
 
Join Date: May 2010
Location: Melbourne Australia.
Posts: 2,218
Default Re: Placement of plug wires in rotor caps
Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by Graham Freeman View Post
Kevin,
Some of the aftermarket caps do not always have this feature.
Graham
Yes but most all caps have the cylinders marked on them. Only cheap shit caps are not marked. Best not use them as some dimensions are also not correct. Regards, Kevin.
koates is offline   Reply With Quote
Reply

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 02:57 PM.