Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-18-2020, 08:46 PM   #7
Kiwi73
Junior Member
 
Join Date: Jul 2020
Location: Auckland, NZ
Posts: 6
Default Re: Holley 94 question

Quote:
Originally Posted by Charlie ny View Post
That check needle is factory.........the needle is brass and not to be confused with
the fuel inlet needle. Without the needle in place the vacuum inside the carb will
cause fuel to be siphoned out thru the accelerator pump discharge 'squirter' at all
times......not just when the pump is depressed.
Charlie ny
Thanks Charlie! This all makes sense now as when I had it running it was impossible to idle properly too. Check valve should be here to tomorrow...
Kiwi73 is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 07:51 AM.