Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-17-2020, 08:20 AM   #12
Bill Goddard
Senior Member
 
Bill Goddard's Avatar
 
Join Date: May 2010
Location: Shrewsbury,Pa
Posts: 516
Default Re: Coil Resistance

Thanks for all the good replies.
I am currently using a 1.5 amp coil from Bratton's with a ceramic ballast wired in series in the red line passenger side -- negative ground.
Road test shows coil heats to 129 degrees F. I can hold my hand on it for several seconds -much hotter would hurt!
The coil is mounted upside down with terminals down. I believe it is an oil-filled coil. I didn't think to shake it before I put it in. I think I will be ok with this arrangement. Bill G
Bill Goddard is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 10:56 PM.