clutch fork

[Synchro909]

Originally Posted by Beater

I just went to my local dealer, George moir in Edmonton alberta, got shafts, bushings. came home took the old ones out and put all the new stuff in. I cleaned up the holes with a 1" ball hone.was done in an hour. things must be diferent size I guess in AUS?

bushings are the same for the pedals. im 99% sure all this stuff comes from sniders. ill find the bacgs with the part numbers if I haven't taken the garbage out yet

The pedal shaft is 1" diameter on all RHD Model As. Ford will have had to make it larger after the 7/8" shafts bent when the brake pedal was jumped on, like in an emergency stop.