The Ford Barn

Harpkatt · 01-25-2020, 01:43 PM

It seems I've neglected to find hardware for my tranmission bellhouse. Can someone clue me in to the the bolt size? Is this a specific Ford hardware?

kenparker · 01-25-2020, 02:42 PM

are you refering to the bolts that hoold the transmission to the bellhouse or the bolts that hold the bellhouse to the flywheel cover???

jw hash · 01-25-2020, 02:50 PM

bell housing to flywheel housing 3/8 X 1" NC, bell housing to transmission 7/16 X 1" NC I could be a little off on the length.

Harpkatt · 01-25-2020, 04:01 PM

Thanks guys. I needed the hardware for both.

kenparker · 01-25-2020, 10:33 PM

The bellhouse to Transmissions bolts are 1/2" dia x 1 1/4" long with a head that takes a 3/4" wrench.

The bellhouse to flywheel cover bolts are 3/8" dia x 1 1/4" long and the head takes a 9/16" wremch and there (I think) twelve of them. The original head had a dome on it. ken

kenparker · 01-25-2020, 10:39 PM

Sponsored Links (Register now to hide all advertisements)

oops left out picture

Stew Masche · 01-26-2020, 11:25 AM

You can try www.fordbolts.com

Benson · 01-26-2020, 11:31 AM

wrong post

DD931 · 01-26-2020, 12:35 PM

The four bellhousing to transmission bolts are Grade 5 (three marks on the head).

01-25-2020, 01:43 PM	#1
Harpkatt Senior Member Join Date: Sep 2016 Location: Long Island Posts: 203	Bellhouse hardware It seems I've neglected to find hardware for my tranmission bellhouse. Can someone clue me in to the the bolt size? Is this a specific Ford hardware?

01-25-2020, 02:42 PM	#2
kenparker Senior Member Join Date: May 2010 Location: Van, Texas Posts: 1,122	Re: Bellhouse hardware are you refering to the bolts that hoold the transmission to the bellhouse or the bolts that hold the bellhouse to the flywheel cover???

01-25-2020, 02:50 PM	#3
jw hash Senior Member Join Date: May 2010 Location: Auburn Washington Posts: 2,696	Re: Bellhouse hardware bell housing to flywheel housing 3/8 X 1" NC, bell housing to transmission 7/16 X 1" NC I could be a little off on the length.

01-25-2020, 04:01 PM	#4
Harpkatt Senior Member Join Date: Sep 2016 Location: Long Island Posts: 203	Re: Bellhouse hardware Thanks guys. I needed the hardware for both.

01-25-2020, 10:33 PM	#5
kenparker Senior Member Join Date: May 2010 Location: Van, Texas Posts: 1,122	Re: Bellhouse hardware The bellhouse to Transmissions bolts are 1/2" dia x 1 1/4" long with a head that takes a 3/4" wrench. The bellhouse to flywheel cover bolts are 3/8" dia x 1 1/4" long and the head takes a 9/16" wremch and there (I think) twelve of them. The original head had a dome on it. ken

01-26-2020, 11:25 AM	#7
Stew Masche Senior Member Join Date: Feb 2014 Location: Lake Mills, WI Posts: 271	Re: Bellhouse hardware You can try www.fordbolts.com __________________ Always one bad decision away from a good time.

01-26-2020, 11:31 AM	#8
Benson Senior Member Join Date: May 2010 Location: Central Highlands, Cen~Col Posts: 2,891	Re: Bellhouse hardware wrong post

01-26-2020, 12:35 PM	#9
DD931 Senior Member Join Date: May 2010 Location: PA Poconos Posts: 723	Re: Bellhouse hardware The four bellhousing to transmission bolts are Grade 5 (three marks on the head).