11-27-2018, 02:09 PM
|
#11
|
|
Senior Member
Join Date: May 2010
Location: now Kuna, Idaho
Posts: 3,833
|
Re: Bearing clearance
Quote:
Originally Posted by Kohnke Rebabbitting
Main and Rod clearance should be .001 per inch of crank. a 2 inch crank should have .002 thousandths clearance, or plus a half, .000-50 tops.
At .001, or .001-50, you will be pushing usable bearing material out of the way, and wasting it, on a 2" crank.
From cold to hot, a 2" crank will swell .002 thousandths.
Herm.
|
Does this mean that at operating temperature .000" oil clearance is acceptable?
|
|
|
Threaded Mode