The Ford Barn

V860too · 09-15-2018, 12:30 PM

FINALLY after 3yrs of looking High and Low,
Flipping over Rocks and looking everywhere.
FINALLY found a Digital Copy of the Book 🙏

Now I have to sit down with my book and verify it is the "PRINT COPY" of the book.

Wont be long now before the 2nd printing will be available.

Bob C · 09-15-2018, 12:52 PM

That is great news.

RobR'35 · 09-15-2018, 04:05 PM

That's great news!
Been starving for the information.

Jembow · 09-15-2018, 04:14 PM

Hallelujah!

Ian NZ · 09-15-2018, 05:34 PM

Is there anything about the 1935 four main bearing two exhaust port Ford V8 -60 engine as per my heading .

Jembow · 09-16-2018, 02:51 AM

Sponsored Links (Register now to hide all advertisements)

There was a very detailed article in an old V8 Times, I have a photocopy. Never seen anything else. My coupe had one until it was exchanged for a T inside in 1937.
,same applies to my friend just down the road with a 35 cabriolet

Jembow · 09-16-2018, 02:52 AM

Sorry that should be 'tinside'

V860too · 09-17-2018, 08:15 PM

35 would be a French 60.
The 60 didn't show up in the U.S. till 1937

Jembow · 09-18-2018, 12:54 AM

My car is a Model 60 supplied from Dagenham, England.

Oakhurst · 09-19-2018, 10:48 AM

How will we know when the 2nd printing is available? Can we order it now?

V860too · 09-23-2018, 03:37 PM

Oakhurst when I have copies in hand, It will be posted here and many other places for people.

gizz · 03-16-2021, 02:54 PM

Does anyone know what ever happened with this. I'd like to get my hands on a copy before it's lost forever.

oldford2 · 03-16-2021, 06:35 PM

Quote:

Originally Posted by Jembow

There was a very detailed article in an old V8 Times, I have a photocopy. Never seen anything else. My coupe had one until it was exchanged for a T inside in 1937.
,same applies to my friend just down the road with a 35 cabriolet

Do you remember what V8 Times it appeared in?
I have all my old V8 times.
Thanks
John

JSeery · 03-16-2021, 06:41 PM

Well, he did log 02-08-2021

mercman from oz · 03-17-2021, 04:10 AM

The V8-60 "Ford's Little Powerhouse " by Richard Willim.

super flat · 03-17-2021, 11:14 AM

I want one when they become available please!

[email protected] · 06-14-2024, 10:47 AM

Hi anyone have a copy of Richard Willim Book Ford v8 60 Fords little powerhouse for sale for a much needed project.
Thanks
Paul

09-15-2018, 12:52 PM	#2
Bob C Senior Member Join Date: May 2010 Location: So Cal Posts: 9,598	Re: "The V860 Ford's Little Powerhouse" book by Richard Willim That is great news.

09-15-2018, 04:05 PM	#3
RobR'35 Senior Member Join Date: Dec 2014 Location: Upper Peninsula, Michigan Posts: 604	Re: "The V860 Ford's Little Powerhouse" book by Richard Willim That's great news! Been starving for the information.

09-15-2018, 04:14 PM	#4
Jembow Senior Member Join Date: Sep 2013 Location: Spalding, United Kingdom Posts: 325	Re: "The V860 Ford's Little Powerhouse" book by Richard Willim Hallelujah!

09-15-2018, 05:34 PM	#5
Ian NZ Senior Member Join Date: May 2010 Location: Taranaki, New Zealand Posts: 924	Re: "The V860 Ford's Little Powerhouse" book by Richard Willim Is there anything about the 1935 four main bearing two exhaust port Ford V8 -60 engine as per my heading .

09-16-2018, 02:51 AM	#6
Jembow Senior Member Join Date: Sep 2013 Location: Spalding, United Kingdom Posts: 325	Re: "The V860 Ford's Little Powerhouse" book by Richard Willim Sponsored Links (Register now to hide all advertisements) There was a very detailed article in an old V8 Times, I have a photocopy. Never seen anything else. My coupe had one until it was exchanged for a T inside in 1937. ,same applies to my friend just down the road with a 35 cabriolet

09-16-2018, 02:52 AM	#7
Jembow Senior Member Join Date: Sep 2013 Location: Spalding, United Kingdom Posts: 325	Re: "The V860 Ford's Little Powerhouse" book by Richard Willim Sorry that should be 'tinside'

09-17-2018, 08:15 PM	#8
V860too Member Join Date: Sep 2015 Location: S.E.Michigan Posts: 33	Re: "The V860 Ford's Little Powerhouse" book by Richard Willim 35 would be a French 60. The 60 didn't show up in the U.S. till 1937

09-18-2018, 12:54 AM	#9
Jembow Senior Member Join Date: Sep 2013 Location: Spalding, United Kingdom Posts: 325	Re: "The V860 Ford's Little Powerhouse" book by Richard Willim My car is a Model 60 supplied from Dagenham, England.

09-19-2018, 10:48 AM	#10
Oakhurst Senior Member Join Date: Sep 2014 Location: Oakhurst, CA Posts: 141	Re: "The V860 Ford's Little Powerhouse" book by Richard Willim How will we know when the 2nd printing is available? Can we order it now?

09-23-2018, 03:37 PM	#11
V860too Member Join Date: Sep 2015 Location: S.E.Michigan Posts: 33	Re: "The V860 Ford's Little Powerhouse" book by Richard Willim Oakhurst when I have copies in hand, It will be posted here and many other places for people.

03-16-2021, 02:54 PM	#12
gizz Junior Member Join Date: Oct 2015 Location: Central PA Posts: 2	Re: "The V860 Ford's Little Powerhouse" book by Richard Willim Does anyone know what ever happened with this. I'd like to get my hands on a copy before it's lost forever.

03-16-2021, 06:41 PM	#14
JSeery Member Emeritus Join Date: Nov 2012 Location: Wichita KS Posts: 16,132	Re: "The V860 Ford's Little Powerhouse" book by Richard Willim Well, he did log 02-08-2021

03-17-2021, 04:10 AM	#15
mercman from oz Senior Member Join Date: May 2012 Location: Queensland, Australia Posts: 12,568	Re: "The V860 Ford's Little Powerhouse" book by Richard Willim The V8-60 "Ford's Little Powerhouse " by Richard Willim.

03-17-2021, 11:14 AM	#16
super flat Senior Member Join Date: Jan 2011 Location: west bend wi Posts: 319	Re: "The V860 Ford's Little Powerhouse" book by Richard Willim I want one when they become available please! __________________ I am usually relatively happy------Gary

06-14-2024, 10:47 AM	#17
[email protected] Junior Member Join Date: Jun 2024 Posts: 7	Re: "The V860 Ford's Little Powerhouse" book by Richard Willim Hi anyone have a copy of Richard Willim Book Ford v8 60 Fords little powerhouse for sale for a much needed project. Thanks Paul