The Ford Barn

Rusty Homestead Fl · 07-02-2018, 09:08 PM

Years ago a friend of mine used roofing "Bull Tar" on the inside of his doors as a sound and vibration deadener. Seemed to work as I recall. Anyone ever tried it . I'm at that stage of assembly.

Jim/GA · 07-02-2018, 10:51 PM

That was used by GM in the '60s.

I recommend a stick on mat like Dynamat. Modern technology.

Bob Bidonde · 07-03-2018, 08:06 AM

Rusty,
I wrote an article about noise & heat reduction that I employed in the restoration of my Victoria. Send me your email and I will send it to you.
My technique uses inexpensive materials you can buy at Home Depot.

Gary WA · 07-03-2018, 04:03 PM

www.lizardskin.com good stuff!

holdover · 07-03-2018, 10:43 PM

Unless you want to spend more money than you need too, this is the way to go

"My technique uses inexpensive materials you can buy at Home Depot."

CarlG · 07-04-2018, 10:57 AM

Sponsored Links (Register now to hide all advertisements)

I've used Dynamat and Roadkill.

slammin · 07-04-2018, 03:31 PM

Most big box stores sell a foil coated bubble wrap looking product. Most have a self stick adhesive. The cheapest have no stickum, but a 3M spray adhesive will do the job. I bought a product, similar to Dynamat, Noico 80 mil Car Sound Deadening Mat 36 square feet for $1.78 per sq ft shipped. It is a heavy foil backed by a thick tar like adhesive.

07-02-2018, 09:08 PM	#1
Rusty Homestead Fl Senior Member Join Date: May 2010 Location: Homestead, Fl Posts: 351	Sound deadener Years ago a friend of mine used roofing "Bull Tar" on the inside of his doors as a sound and vibration deadener. Seemed to work as I recall. Anyone ever tried it . I'm at that stage of assembly.

07-02-2018, 10:51 PM	#2
Jim/GA Senior Member Join Date: May 2010 Location: Young Harris, GA Posts: 2,093	Re: Sound deadener That was used by GM in the '60s. I recommend a stick on mat like Dynamat. Modern technology. __________________ Jim Cannon Former MAFCA Technical Director "Have a Model A day!"

07-03-2018, 08:06 AM	#3
Bob Bidonde Senior Member Join Date: May 2010 Location: Long Island, NY Posts: 4,385	Re: Sound deadener Rusty, I wrote an article about noise & heat reduction that I employed in the restoration of my Victoria. Send me your email and I will send it to you. My technique uses inexpensive materials you can buy at Home Depot. __________________ Bob Bidonde

07-03-2018, 04:03 PM	#4
Gary WA Senior Member Join Date: May 2010 Location: Clinton,WA/Whidbey Island Posts: 4,614	Re: Sound deadener www.lizardskin.com good stuff! __________________ www.whidbeymodelaclub.com

07-03-2018, 10:43 PM	#5
holdover Senior Member Join Date: May 2011 Location: SW Virginia near the Blue ridge Parkway Posts: 674	Re: Sound deadener Unless you want to spend more money than you need too, this is the way to go "My technique uses inexpensive materials you can buy at Home Depot."

07-04-2018, 10:57 AM	#6
CarlG Senior Member Join Date: Nov 2010 Location: Anchorage, Alaska Posts: 9,212	Re: Sound deadener Sponsored Links (Register now to hide all advertisements) I've used Dynamat and Roadkill. __________________ Alaskan A's Antique Auto Mushers of Alaska Model A Ford Club of America Model A Restorers Club Antique Automobile Club of America Mullins Owner's Club

07-04-2018, 03:31 PM	#7
slammin Senior Member Join Date: Aug 2017 Location: Fruita, CO Posts: 281	Re: Sound deadener Most big box stores sell a foil coated bubble wrap looking product. Most have a self stick adhesive. The cheapest have no stickum, but a 3M spray adhesive will do the job. I bought a product, similar to Dynamat, Noico 80 mil Car Sound Deadening Mat 36 square feet for $1.78 per sq ft shipped. It is a heavy foil backed by a thick tar like adhesive.