37 engine rebuild (valve train)

[Don]

Have had this engine out of my 36 5 w for several years ,has not run in over 50 years,finally got it apart,tearing up only a couple of valve guides and valves,after hot tanking engine and cleaning had Jim come ove r and mic everything,everything was in tolerance decided to do a valve and ring job and go with it,have a little green book 37-48 that tell how to do this,have accumulated all the tool over years to do the valves.Took awhile but came out really good,here's some tools I used,http://jpg
Used a dummy valve to get length from seat to lifter ,took this measurement and zero out subtract .012 or .014 ,zero this out,measure valve,which always comes out on + side ,tells me how much to remove,works every time.

[Don]

Couple more pic,Didn't know what the little clip was forever,had several boxes of them,then saw where a guy had made a couple and how to use them,makes it pretty simple to put a valve assembly it and take out.

[tubman]

If that clip works like I think it does, that's a pretty slick idea!

[Bruce in southern OH]

Great!!!

[Sid the Maineiac]

Thank,Don! I'll bet that 36 is looking good ! Got any recent pictures?

[Don]

Sponsored Links (Register now to hide all advertisements)

Hey Sid,long time,,,no on the 36'all done but painting,,,been ready for about 5 years,just cant get around to it,you interested in another project???