The Ford Barn

Fibber Mcgee · 06-01-2017, 11:22 AM

I'm in the middle installing the fender welt on my 41(thanks for all the previous advice) and can't remember if there was welting between the trunk and the fender and the chin piece and the fenders. It's been so long since I took it apart I forgot.

Steves46 · 06-01-2017, 08:06 PM

Maybe a long shot but try typing "1941 Ford Trunk" in Google, click on images and see what photos come up. Steve

fordor41 · 06-01-2017, 10:18 PM

Sponsored Links (Register now to hide all advertisements)

Mine has welting that follows the rear fender all the way to the bottom of the fender, front and rear of the fender. welting in front goes from the top of the grill,actually the end of the latch plate down to the bottom of the chin panel and between the grill and the chill panel. is a bit of a fussy job. I installed welting to the front fender, then the chin panel. install the chin panel sort of loosely. slide the grill into place and tighten the bolts. I use nylok nuts so I can tightened as needed.

06-01-2017, 11:22 AM	#1
Fibber Mcgee Senior Member Join Date: Oct 2010 Location: Callahan Fla Posts: 1,152	Emergency Fender welt question I'm in the middle installing the fender welt on my 41(thanks for all the previous advice) and can't remember if there was welting between the trunk and the fender and the chin piece and the fenders. It's been so long since I took it apart I forgot. __________________ Wanted, a car with a " Dynaflex Superflowing Unijet Turbovasculator which is Syncromeshed to the Multicoil Hydrotensioned Dual vacuum Dynomometer. "

06-01-2017, 08:06 PM	#2
Steves46 Senior Member Join Date: May 2010 Location: Lithia, FL Posts: 1,098	Re: Emergency Fender welt question Maybe a long shot but try typing "1941 Ford Trunk" in Google, click on images and see what photos come up. Steve __________________ If it aint broke, don't fix it!

06-01-2017, 10:18 PM	#3
fordor41 Senior Member Join Date: Oct 2011 Location: elmira,ny Posts: 1,576	Re: Emergency Fender welt question Sponsored Links (Register now to hide all advertisements) Mine has welting that follows the rear fender all the way to the bottom of the fender, front and rear of the fender. welting in front goes from the top of the grill,actually the end of the latch plate down to the bottom of the chin panel and between the grill and the chill panel. is a bit of a fussy job. I installed welting to the front fender, then the chin panel. install the chin panel sort of loosely. slide the grill into place and tighten the bolts. I use nylok nuts so I can tightened as needed.