1939 pickup solenoid

[CP]

pic of the 4-post 6 volt positive ground solenoid(starter switch) to be installed.

Of course there are no markings on the small terminals designating "+", "-", "S", "I", "R" or anything else for that matter. Brother states he installed with the same wires going to the same terminals as the older version.

The "botton" on the solenoid cranks, but the button on the dash does "not" work now. The truck does not run.

Second "New" 6v coil "properly" installed (positive ground).

I'm guessing we may have damaged the dash switch. will be looking at tomorrow night.

Thanks again all, and will keep you posted.

cp