The Ford Barn

Lap · 03-12-2017, 04:54 PM

IMG_2906.jpg

IMG_2907.jpg

37 Ford Pickup braces for the Front Fenders?? I dont have a clue how or where they go??

Thanks

nelsb01 · 03-12-2017, 06:24 PM

First -- they look bent.
The end with the carriage bolt goes into the frame. The end with the bolt goes into the main front fender brace. They attach at 45 degree angle and they go through the inner fender panel -- the hole.

Lap · 03-13-2017, 07:38 PM

First - everything on my truck is bent.

Its amazing how obvious things are once you know how!

Thank you very much..

Leo

nelsb01 · 03-13-2017, 08:45 PM

You may want to check the base part number is 16067 -- I believe they are the same for a passenger vehicle. 48-16067 they are being re-popped.

cas3 · 03-13-2017, 09:11 PM

Sponsored Links (Register now to hide all advertisements)

good one leo! i can relate, most things i own are bent too!!

03-12-2017, 04:54 PM	#1
Lap Junior Member Join Date: May 2014 Posts: 5	Little help please?? IMG_2906.jpg IMG_2907.jpg 37 Ford Pickup braces for the Front Fenders?? I dont have a clue how or where they go?? Thanks

03-12-2017, 06:24 PM	#2
nelsb01 Senior Member Join Date: May 2010 Location: Up North Posts: 870	Re: Little help please?? First -- they look bent. The end with the carriage bolt goes into the frame. The end with the bolt goes into the main front fender brace. They attach at 45 degree angle and they go through the inner fender panel -- the hole.

03-13-2017, 07:38 PM	#3
Lap Junior Member Join Date: May 2014 Posts: 5	Re: Little help please?? First - everything on my truck is bent. Its amazing how obvious things are once you know how! Thank you very much.. Leo

03-13-2017, 08:45 PM	#4
nelsb01 Senior Member Join Date: May 2010 Location: Up North Posts: 870	Re: Little help please?? You may want to check the base part number is 16067 -- I believe they are the same for a passenger vehicle. 48-16067 they are being re-popped.

03-13-2017, 09:11 PM	#5
cas3 Senior Member Join Date: Jan 2011 Location: Beverly Kansas Posts: 5,557	Re: Little help please?? Sponsored Links (Register now to hide all advertisements) good one leo! i can relate, most things i own are bent too!!